DringMoi

reactivate volume by calls

This little program, free, allows you to activate, by simple calls, the ringing of your phone. And yes!

Configuration / Compatibility:
To do this you must still configure some elements, such as phone number initiating the change, the number of missed calls (inevitably) needed before modification and, of course, the time interval that the software should go check missed.

The operation is in itself very simple. DringMoi will read the latest entries in the log of missed calls, according to a regular set (every 2, 5, 7, 10, 15 or 30 minutes). Depending on configuration, number of calls required (1-4) and the calling number, the phone will issue its ringer volume to maximum. Thus, the next time you hear your phone ring!

Note that while there is not the right number of missed calls made by call number programmed, the software will get back into the fixed time interval. Otherwise, it does not restart for retest. Similarly, if the volume is already set up, the software does not restart.

Note that if your phone has no battery ... you can not hear!


Its usage is simple. Upon installation, a directory "DringMoi" is created in "Start / Programs" and a shortcut DringMoi Settings "" Start / Program "(for the case or the creation of the directory does not work ).
In this directory, you have three shortcuts:

* DringMoi Settings: allows you to specify No calling, checking interval of missed calls and the number of appeals. As well as activate the software.

* DringMoi Launch: shortcut that allows you to directly launch the eve of the software. Note however that if in the Settings (see another shortcut) you have not activated the software, it will make his test once.

DringMoi

CallCalendar

This utility is installed on a windows mobile device and logs all incoming and outgoing calls to the device calendar.

Example: This can be used to log every call you make that needs to be tracked for data/billing purposes.

CallCalendar

InCall Lock

Lock Send/End buttons on incoming call

InCall Lock will temporarily disable Send (aka Talk, Green) and End (aka Red) hardware buttons when you receive an incoming call in order to prevent accidental call pickups/rejects while you are pulling your device out of your pocket. All other hardware buttons are untouched.

After you answer/reject your call the application will release the buttons, so you will be able to hang up, put calls on hold etc. using hardware buttons normally.

The application, after being launched, will remain resident in memory but will not use any CPU cycles at all as it relies on WM Notification system and doesn't do any polling. As it is using WM internal event system, it should work regardless of OS language, installed dialer etc.

This is a zero config application and has no options (yes, this is a feature). I personally needed an application that would do just this - temporarily block these buttons. If you need a device locker, try PocketShield or other available solutions.

How to use:
Install attached cab
Soft reset or launch "InCall Lock Toggle"
To enable/disable InCall Lock temporarily, use InCall Lock Toggle in your Programs menu.
To disable it permanently, just uninstall via Settings - Remove Programs

InCall Lock

LnkMe v1.1

Create SMS and Call shortcut files with just a few steps.

Manually creating shortcut files for sms and call sending to specific contacts requires using a text editor (in PPC and PC) and then manually typing text codes and memorizing the phone number for that particular contact, then repeating the same procedure again and again for each contact.

I've created this simple application to automate all of this. I hope it will also be useful to other people.

The shortcut files created will allow you to automatically create a new sms for a particular person, or make a call to a person, depending on what lnk file you chose to create.

change log:
v1.1
- multiple contacts LNK creation
- fixed call shortcut bug
- option to add SMS body in SMS shortcut link

oldSAP LnkMe v1.1 CAB

Connecting Notifier

It vibrates, it keeps you away from your phone for as long as possible, it let’s you drive safer, it notifies you when you needed it the most and best of all, it makes you feel like you are not waiting and wasting your time at all.

The Connecting Notifier will output a short vibration each time your outgoing call gets picked up. No longer are the days where you have to hold up the phone to your ear while waiting for calls to connect. Benefits? There is plenty. Cost? It’s free to download and only takes up 8 Kb on your storage.
The Connecting Notifier is available for both the Samsung PocketPCs and Smartphones including the Omnia, Epix, Blackjack II, Jack and Propel Pro. And now, the moment you’ve been waiting for, the list of benefits that you can gain from this application:
Health: reduce chance of damage to the brain from excessive radiation
Safety: Allows you to keep your hands on 10 and 2 until you have to pick up the phone
Etiquette: In a meeting and making an emergency call? Only pick up the phone when its connected!
Finance: People say time is money, the days of waiting for calls to connect is over! Now you have time to finish your twitter posting

Connecting Notifier

Download PPC CAB here

Mobile Panel

Never miss a call, appointment or SMS

Just connect your Windows Mobile to the computer and you will have missed calls, incoming calls, new SMS and reminders at your desktop. When the Mobile Panel is collapsed it's very small and can be placed anywhere on the screen. When someone is calling or there is a new SMS it pop-ups. There is a number of settings like "Always on top", Transparency, sound etc.

New SMS

Handle your unread SMS from the desktop. Just click at the mail icon and the panel is expanded with the message text and contact information. If you like you can send a reply or delete the SMS.

Incoming Calls

When someone is calling you the Mobile Panel pops-up and expands. You can immediately answer or reject the call.

Missed Calls

When you're missing a call the Mobile Panel pop-ups. Just click at the phone icon to view the list of calls. If you like you can call the contact just by clicking the call button.

Reminders

When your phone is connected to Mobile Panel you will have the reminders at the desktop instead of your mobile phone. You will always see the next appointment.

Mobile Panel

Wrukwiacz

the ultimate SMS spammer & fake call bomber

In the first text box you can write a victim (or victim's) number (separated by a semicolon, but when you add a numer from More -> Add contact, or by pressing OK on the number text box, the semicolon is added automatically). The 'repeat:' change to a number of attempts of the destination mode. Then choose 'call time' - it's the time from the number dial to call hangup (but it's not necessary when you're using SMS), then choose 'break time' - it's a break between a call hang up (or when SMS is send) to next attempt.

When you use call bombing it's very possible then someone can answer it before the program automatically hangs it up. So Wrukwiacz is designed to instant hang up the call when the victim answers it But the overall time for the call is 1-2sec and that costs to, so remember that.

More -> Mode, there you can choose if all attempts will be done for one victim and then to another from the list, or alternately for every one victim. Just try it to know how it works.

While using SMS bombing, you can save them to the registry and later open them.

Wruwiacz was tested on WM6.0, 6.1 and 6.5 on Standard and Professional versions.

Wrukwiacz

Phone Creeper

This is a phone espionage suite.

Currently it has the following features:
* secretly and remotely read incoming / outgoing sms
* secretly and remotely delete incoming / outgoing sms
* secretly and remotely view call history
* bounce sms messages off remote phone to someone else.
* create a pop-up message on phone
* send a secret fart sound
* secretly and remotely listen to person. (Initiates silent call back of person to your phone with thier speaker phone enabled)
* also send listening in call to somebody else's phone

all results will be sent via SMS back without leaving any trace on the phone being controlled.
Any cell phone can be used to initiate the commands and all commands will respond with a success message for acknowledgement.

*** HOW TO USE IT ***

Just install .cab on persons wm5 or higher phone.
THEN MAKE SURE YOU REBOOT TO INITIATE IT.
by default the password is "chetstriker", obviously not including the quotes and BE SURE IT'S ALL IN LOWER CASE.
the command structure is (password and then command)

To receive call history, send the following text to phone with this installed on it:
chetstriker getcalls
To receive incoming SMS mesages:
chetstriker getrecsms
To receive sent SMS messages:
chetstriker getsentsms
To delete all SMS messages:
chetstriker delallsms
To delete received SMS messages:
chetstriker delrecsms
To delete sent SMS messages:
chetstriker delsentsms
To wipe your storage card:
chetstriker wipeflash
To send a fart:
chetstriker fart
To send a pop-up message:
chetstriker message "insert msg here, without quotes"
To bounce sms off phone to someone else:
chetstriker bounce sms "phone number to send to" "message to send"
To send your eaves droping call to someone else:
chetstriker bounce call "phone number to send to" "message to send"
To change password:
chetstriker change "newpassword"
(Obviously change "newpassword" to be what ever password you want and don't type the quotes.)
After you have changed your password, make sure you use the new commands accordingly. For example, if I changed the password to yellow and wanted to get call history. I would from now on type:
yellow getcalls

Phone Creeper

Simple Redial

Simple Redial calls the most recent number in the dial history. No history, no call.
Call attempt number and time between call attempts can be selected using the two drop down lists.
On tapping Redial the program starts the call attempts and goes on until one of these happens.
1 - A call attempt is answered. The program produces a 'connected' notification (sound plus short vibration) and exit. Speakerphone can be optionally activated (check Keep on Speakerphone).
2 - You tap Abort. After current attempt ending the program produces a 'not connected' notification (sound plus vibration).
3 - You tap Exit. After current attempt ending the program exit (no notification).
4 - All the attempts fail. The program produces a 'not connected' notification (sound plus vibration).
5 - An inbound call arrives between call attempts. The program exit (no notification).
The 'not connected' notification is played when the phone call is not active and is so a 'normal' notification. Therefore, you can control it with volume and vibrate/silent settings.
The 'connected' notification is played when the phone call is active and this is somewhat tricky. You can not control it with volume and vibrate/silent settings but you can select whether it is played on speakerphone (check Sound on Speakerphone) or on the phone speaker (uncheck Sound on Speakerphone).


Tweaking

The sounds used by the program are Connected.wma and NotConnected.wma in the installation directory. You can change them if you like by replacing these files. If your Connected.wma is longer and gets truncated you should change the registry HKCU\Software\SimpleRedial\ConnectedSoundSecs. This is the time in seconds the program allows for Connected.wma playing before exiting.

Simple Redial

Easy Contact

Easy Contact is a finger-friendly contact, SIM and CallsLog manager for Windows Mobile PocketPC phones.

This is a ALPHA version and only support VGA and WVGA screens. (by the moment).

Main Features:

- Contact Manager;
- SIM Manager;
- CallLog Manager;
- Favorites Manager;
- Language customizable;
- Skinnable;
- Finger-friendly;
- Intuitive;
...

Easy Contact settings can be found in: "HKEY_LOCAL_MACHINE\Software\LoFFactory\Easy Contact\Settings".

Easy Contact

OneDialer

Google Voice Internet SMS and Dialer

This application works kinda like GVDialer and iDialer in the fact that it utilizes your Google Voice account to make phone calls. The difference is, it uses Wifi or data link on your phone to place the calls and send/receive SMS (text) messages.


Features:
*Dials numbers through your Google Voice account and has them ring back to your phone. With this app, some phones will automatically pick up the call once it comes in without your phone ringing. I'd like to know what phones this works on, since it doesn't seem to work on all phones.
*Sends and receives SMS messages through your Google Voice account.
*Integrates with your Windows Mobile contacts, so that you may dial or send messages to your contacts that already exist on your phone.

This application works best on VGA/WVGA touchscreen Windows Mobile 6 with NETCF3.5 and above phones.

OneDialer

Phone Alert Screen

Customized WM6.5 Phone Alert Screen displayed on an incoming call comes when phone is locked.

Install the cab and restart.

QVGA Portrait Mode Only

Phone Alert Screen cab file

Source

PortSIP

PortSIP CE is the newest free softphone application from PortSIP, it's built base on PortSIP VoIP SDK, allowing users to enjoy multimedia communications in a dynamic way.

PortSIP CE works seamlessly with your internet connection – you can chat away with free calls and never worry about cost, time or distance. It including great features to help you stay in touch with friends, family and co-workers, share your thoughts and views and find the information you need. You can use it on your PDA

PortSIP CE is a VOIP softphone that running on Windows Mobile 5.0/6.0, allows you to speak with any other softphone , any stand-alone IP-phone, or using Internet Telephony Service Provider (ITSP) with any traditional wired or mobile phone. It supports SIP and is fully inter-operable with most major VOIP vendors and ITSPs.

Standard Features
Support platforms: Windows Mobile 5/6
Support Device Screen: QVGA(320*240),VGA(640*480)
Support servers: Cisco CallManager, Open SER, SER, Asterisk, Portaone, Radvision, Nortel, Rainbow, Avaya and other SIP Platforms.

Switch between earpiece and load-speaker(Does no support some devices, likes Samsung I708)
Audio call: G.711 aLaw/uLaw, GSM, G723.1, G729.
Call transfer: Blind transfer
Call hold, mute speaker, mute microphone.
Audio record: record audio as wave file.
DTMF support: Send DTMF tone(RFC2833 and SIP INFO method), detect DTMF tone(RFC2833 and SIP INFO method).
Silent Ringtone
Acoustic Echo Cancellation
Automatic gain control
Comfort Noise Generation
Voice Activity Detector
STUN support
Outbound proxy server support
Jitter buffer
Freeware

Attention!
Having PortSIP installed is not enough to talk except over your local network. You have to obtain an account with any ITSP like Vonage or SipIptel.org, or install your own VoIP server.

PortSIP

Windows Mobile Monitor

The application runs silently and invisibly recording all text message and phone call activity that takes place on the phone.

A desktop client application allows you to easily and quickly transfer the activity log to your own computer.

System Requirements:
Mobile Device: Windows Mobile 2003, 5.0, 6.0; .NET Compact Framework 2.0
Desktop Computer: Windows XP, .NET Framework 2.0

Windows Mobile Monitor

MSentinel

MSentinel checks for any:
- missed calls,
- unread SMS/MMS,
- 'missed' tasks and calendar reminders, and notifies about that by sound.

You can specify the time period of checking, time when the sound should be played (I don't want to be disturbed at night). You can also decide if the screen should be switched off after notification.

After checking application leaves the device in the state that was before checking (if it was 'on' state - it will be the same after checking; if it was 'stand by' state - it will be the same after checking).

Language: Polish, English.
If you want to add a new translation you can make a copy of 'English.lng' file, rename it to 'YourLanguageName.lng' and edit the strings. Save it using UTF-8 charset.

Requirements:
• Windows Mobile 5.0 / WM 6
• .NET CF v2.0

Licence: freeware

MSentinel

mFree

telephony summary

This tool gives you an one-view-overview for your telephony data, like send and recieved SMS/MMS/Email, count and time of incoming and outgoing call and an overview about the data amount and time duration of your internet connections.

mFree

Net Caller ID

an enhanced Caller ID

On incoming SMS or phone calls a window pops up that
displays,

- The full name of caller
- Address of caller with a map link
- The number of FTC and caller complaints (to tell if it’s a spam call)
- Telco name and location (can tell what carrier the call is from)
- Relatives of caller (with age!)
- Criminal History

Release Notes --

- NetCallerID waits until the call is answered or finished before doing the network calls. For the most part, the network connection is
unavailable until the phone call is ended.
- If roaming is enabled NetCallerID waits until your out of roaming.
- All history of calls are in the program files\netcallerid\calllogs directory in html format. You can view these with Opera or Pocket IE.
- The setup automatically starts the program. I also put it in \Windows\Startup to start when you re-start the phone.

Net Caller ID

My Call Logs v1.1

Simple call log application.

Features:
- show total incoming/outgoing calls in minutes
- show number of missed calls
- restrict call logs based on date/dates

Change Log:
v1.1 (Feb 28, 2009)
- slightly faster for restricted call log summary
- added minimum time for each call (ie: any call < 60 secs shall count as 60 secs).

v1.0
- initial release

My Call Logs v1.1

My Call Logs v1.0

PhonyCall

A "fake call" freeware. Right now it only has the calling screen but will soon contain an in call screen with a timer.

Customization:


The delay time can be adjusted (in terms of miliseconds) by editing the delay.ini file in the application directory.
The Name and number can be adjusted by editing the data.ini file
the background image (the phone canvas) and be changed by replacing the "screen" image file (png, jpg, and jpeg are currently supported) in the application directory.
The ringtone a can be changed by dropping a different sound file named "ringtone" in the application directory. (currently wav and mp3 are supported)


There is also the option to use a screen shot only by removing the data.ini.

PhonyCall

Historia

An advanced call history for Windows Mobile devices

This program will give you much more advantages over the built in call history of Windows Mobile.

- Have you ever wanted to search for a number in your call log, but found it too frustrating to go all over the log ?
- Have you ever wanted to see more numbers on each screen ?
- Have you ever needed to view the details of each call without having to tap on each number ?
- Have you tried to copy a number to the calendar or to a note and found out it's impossible to copy a number from the call log ?
- Do you get many incoming calls from customers and want to see when you talked with each in the past ?
- Do you have missed calls from unknown callers and want to see if you talked with them before ?
- Do you want to see what are the longest calls you make, so you can control your expenses better ?

If you answered yes to one or more questions, then you must have Historia.

Features

- Detailed information on each call .
- sorting by any column.
- 15 lines of calls per page.
- Copying a number or the entire call details.

Historia